Effortless Relaxation Achieved with Osaki OS-4000XT Massage Chair
News Article: Assembling and Moving the Osaki OS-4000XT 2D Massage Chair
The Osaki OS-4000XT, a top-of-the-line massage chair, offers a range of features designed to provide a luxurious and relaxing experience. Here's what you need to know about assembling and moving this massage chair.
The Osaki OS-4000XT is designed to accommodate any user, with a maximum weight capacity of 260 lbs. The net weight of the chair is 175.2 lbs, and the gross weight is 217.1 lbs, including the packaging. The power supply for the chair is 110-120V at a rate frequency of 50/60 Hz.
When it comes to dimensions, the chair's width is approximately 28.8 inches, making it a compact fit for most spaces. However, due to its extendable footrest and space-saving technology, length clearance is crucial. When reclined, the chair's dimensions are 28.8" x 79" x 37". When upright, the dimensions are 28.8" x 67.2" x 44.5".
For safe and practical entry, a minimum doorway width slightly more than 28.8 inches is recommended. Ideally, a doorway width of 32-36 inches would be ideal to accommodate easy turning and handling. It's also important to note that the chair may arrive in multiple boxes, needing assembly (attaching armrests, footrest, etc.) and might require maneuvering in a fully reclined position using a dolly.
The height clearance of a standard doorway (usually 80 inches) is sufficient since the chair’s height is under 45 inches, even when reclined. If the door cannot be fully opened, measure the width from the edge of the door hinge. It's recommended to use a standard measuring tape when measuring the doorway.
The chair comes with a Remote Controller, 3D Surround Sound Audio, and Specialized Foot Rollers for an immersive and soothing massage experience. The user manual can be downloaded for easy setup and operation instructions.
When measuring the doorway, if there's a rounded curve on the wall, calculate the inner width based on the most protruding point of the wall. The width of the shoulder area on the massage chair is 20.5'', and the seat width is 19.5''.
In conclusion, the Osaki OS-4000XT 2D Massage Chair, with its compact design and advanced features, can be a great addition to any home. To assemble and move the chair, a minimum doorway width of about 32 inches is recommended, with a height clearance of a standard doorway being sufficient. Keep in mind the space to maneuver the chair lengthwise due to its 67.2-inch length when positioning it in the room. Enjoy your new massage chair!
[1] Source: Osaki OS-4000XT Product Page [2] Source: Massage Chair Guide
Read also:
- Methods for contributing to the charity affiliated with our website, Global's Make Some Noise
- Exploring Color Consonance: An In-depth Analysis of the Aesthetic Influence of 2025's Preferred Colors in Community Residential Areas
- Discussion: Subsonic Discusses Touring, Frequency Adjustments, and Upcoming Track 'Where You Are'
- Maintain a tight bond with your friends, but maintain an even closer relationship with your digital entities
